Mitsubishi A1SD51S, Руководство по программированию

Страница: 455 / 688

11 - 285 11 - 285
MELSEC-Q
11 INSTRUCTIONS AND FUNCTIONS
(2) Program example for a format 2 control table
100 ' A program example that writes data to extension file registers by specifying sequential addresses
110 DIM TBL%(10),A%(20) : 'Defines arrays
120 TBL%(0)=255 : 'Specifies a format 2 control table
130 TBL%(1)=1 : 'Specifies network number 1
140 TBL%(2)=1 : 'Specifies station number 1
130 TBL%(4)=7 : 'Specifies to write data to extension file
registers by specifying sequential
addresses
140 D!=10 : 'Specifies the sequential addresses for
writing
150 H!=INT(D!/65536!)
160 L!=D!-H!*65536!
170 H$=RIGHT$("0000"+HEX$(H!),4) : 'Higher byte of the sequential address
180 L$=RIGHT$("0000"+HEX$(L!),4) : 'Lower byte of the sequential address
190 TBL%(5)=VAL ("&H"+L$) : 'Stores the lower byte in the control table
200 TBL%(6)=VAL ("&H"+H$) : 'Stores the higher byte in the control table
210 TBL%(7)=3 : 'Specifies the number of points to be
written
220 A%(0)=0123 : 'Specifies the data to be written
230 A%(1)=4567
240 A%(2)=8901
250 PCWT TBL%( ),A%( ) : 'Executes the write operation
260 END