Mitsubishi Electric M70V Series, Руководство по подключению

Страница: 35 / 250

1 System Configuration
MITSUBISHI CNC
10
(Note 1) "x" in type columns indicate cable length (unit: m).
(Note 2) Lengths indicated with an asterisk (*) in the max. cable length column indicate the maximum cable length
when connecting via other unit.
FCUA-R211-xM
Remote I/O (with terminal block)
between remote I/O,
remote I/O - CNC control unit,
remote I/O - Operation panel I/O unit,
remote I/O - MITSUBISHI CNC machine operation panel A
0.3, 1, 2, 3, 5, 8, 10, 15, 20 30m (*)
FCUA-R300
DI/DO cable (one side connector)
(for remote I/O unit)
3 50m
FCUA-R301-xM
DI/DO cable (both side connectors)
(for remote I/O unit)
1, 2, 3, 5 50m
G011 LxM Operation panel I/O interface cable 0.5 0.5m
G023 LxM
Manual pulse generator cable (5V): 1ch
(for connection to control unit)
1, 2, 3, 5, 8, 10, 15, 20 20m (*)
G024 LxM
Manual pulse generator cable (5V): 2ch
(for connection to control unit)
1, 2, 3, 5, 8, 10, 15, 20 20m (*)
G071 LxM DC24V relay cable for MITSUBISHI CNC machine operation panel 0.5 0.5m
G300 LxM
LAN cross cable
(Shielded cable is recommended when the length will be 1m or more)
1, 3, 5, 10 10m
G301 LxM
LAN straight cable
(Shielded cable is recommended when the length will be 1m or more)
1 1m
G380 LxM
Optical communication cable
For wiring between drive units (outside panel)
For optical communication repeater unit
5, 10, 12, 15, 20, 25, 30 30m
G395 LxM
Optical communication cable
For wiring between drive units (outside panel)
For wiring between NC-drive units
3, 5, 7, 10 10m
G396 LxM
Optical communication cable
For wiring between drive units (inside panel)
0.3, 0.5, 1, 2, 3, 5 10m
G460 LxM
Cable between MITSUBISHI CNC machine operation panel A and
MITSUBISHI CNC machine operation panel B
0.5 0.5m
MR-BKS1CBLxM-
A1-H
<200V Series>
Brake cable for HF-KP
Lead out in direction of motor shaft
2, 3, 5, 7, 10 10m
MR-BKS1CBLxM-
A2-H
<200V Series>
Brake cable for HF-KP
Lead out in opposite direction of motor shaft
2, 3, 5, 7, 10 10m
MR-PWS1CBLxM-
A1-H
<200V Series>
Power cable for HF-KP
Lead out in direction of motor shaft
2, 3, 5, 7, 10 10m
MR-PWS1CBLxM-
A2-H
<200V Series>
Power cable for HF-KP
(Note) It can not be used with HF-KP13.
Lead out in opposite direction of motor shaft
2, 3, 5, 7, 10 10m
R-TM Terminator for remote I/O interface - -
SH21 LxM
Power supply communication cable
Power backup unit communication cable
Cable for Auxiliary axis/Servo drive unit 0.35, 0.5, 0.7, 1, 1.5, 2, 2.5, 3,
3.5, 4, 4.5, 5, 6, 7, 8, 9, 10, 15, 20,
30
30m
SH41 LxM
Remote I/O cable
between remote I/O,
remote I/O - CNC control unit,
remote I/O - Operation panel I/O unit,
remote I/O - MITSUBISHI CNC machine operation panel A
(between remote I/O units in a panel)
0.3, 0.5, 0.7 1m (*)
Type Application
Length (m) of cables provided
by Mitsubishi
Max. cable
length