Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, Руководство пользователя

Страница: 50 / 162

48
6 Parameter Setting
6.2 IO-Link Module Parameter Setting
The following table lists the items to configure.
5.
Click the [Execute] button and the following window is displayed.
6.
Click the [Yes] button.
7.
The parameters are written to the IO-Link module.
8.
Select [Close with Reflecting the Setting] to exit the network configuration setting.
• Select parameters to be set.
• Set all the items for the selected parameters. If any blank exists, the parameters cannot be written to the IO-
Link module.
• To read the parameter from the IO-Link module, set "Method selection" to "Parameter Read" and click the
[Execute] button.
Setting item Reference
Station parameter Initial operation setting Page 80 Initial Operation Setting Function
Output HOLD/CLEAR setting Page 93 Output HOLD/CLEAR setting function
Basic module parameter Number of ON times setting Page 77 Number of SIO output ON times
integration function
Pin configuration setting Page 63 IO-Link cyclic transmission function
Page 75 SIO input function
Page 76 SIO output function
IO-Link parameter
(Channel 1 to channel 8 setting) Process data size Page 63 IO-Link cyclic transmission function
Swap setting Page 73 Swap function
Data storage configuration Page 66 IO-Link device setting automatic
upload/download function
Validation setting Page 69 IO-Link device validation function
Vendor ID
Device ID