Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, Руководство пользователя

Страница: 20 / 162

18
1 PART NAMES
■
Network configuration
Window transition of the network settings window is as follows. Use the [SEL.] button to change the window.
The station number and network number can be changed by pressing and holding the [SET] button on the relevant window.
Operating procedure
(1) Press the [SEL.] button on the network configuration window of the main menu
(2) The station number is displayed.
(3) The network number is displayed.
(4) The number of RX/RY points used is displayed.
(5) The number of RWr/RWw points used is displayed.
1.
Press the [SEL.] button on the network configuration window to display the station
number or network number window.
2.
Press and hold the [SET] button to enter the edit mode.
3.
Press the [SEL.] button to increment the value by one. (Pressing the [SEL.] button at 9
would reset the value to 0.) The cursor to change the digit starts at the far left by
default, and pressing the [SET] button changes the cursor location.
4.
Press the [SET] button with the cursor located at the far right to save the value and
exit the edit mode. At this time, the backlight will flash and

will be displayed on the
LCD screen. The changed value will be applied when the IO-Link module is restarted.
(2) (3)
SEL.
SEL.
SEL.
SEL.
SEL.
(4) (5)
(1)