Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 62 / 388

52
Operation of the Monitor Wall
3
2. Press ENTER again to obtain the list of rooms from the Kaleido-X systems that are currently available
on the network.
The rooms are listed in the form [frame name]/[room name]. If a room belongs to a cluster system, its
name appears once for each of the member frames (e.g. if two frames, KX1 and KX2, are configured as
a cluster, and ROOM1 includes displays fed by both frames, then both KX1/ROOM1 and KX2/ROOM1
will be listed. You may select either one.
3. In the room list, select the room you wish to access by pressing the 2 key (to move up in the list) or the
8 key (to move down the list).
4. When the appropriate room name is highlighted, press ENTER to accept the new selection, and then
press ESC to exit the Configuration menu.
5. Press the LOGIN key.
The following message will appear on the LCD display:
LOGIN Position
Admin
6. Select your user name by pressing the 2 key (to move up in the list) or the 8 key (to move down the list).
7. When you user name is highlighted, press ENTER.
8. When prompted, type the password for this user name, then press ENTER.
Note: By default, the user name “Admin” has no password.
Note: By default, the two head (DVI/VGA) outputs from each of the output A, B, C and D cards are
assigned to ROOM 1, ROOM 2, ROOM 3 and ROOM 4 respectively.
The message “Access granted” will appear on the LCD display if the login is successful. If a mouse is
connected to the RCP2, then you should be able to see and move the mouse pointer on the monitor
wall. Alternatively, use the RCP2’s mouse-function keys.
Notes
• If at any time the message “Target system is offline” or “No login list available” appears on the LCD
display, press the ESC, ENTER and DEL keys simultaneously and go back to step 1.
If the room you were logged on is part of a cluster system, try accessing it from a different frame (e.g.
select KX2/ROOM1 instead of KX1/ROOM1, from the room list).
• The pointer may flicker when two RCP users access displays fed by the same output card.
• Two users accessing the same display will be limited to sharing a single pointer.
For more information on the Kaleido-RCP2, please refer to the
Hardware Description & Installation Manual ,
available on the DVD that shipped with your system.