Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 310 / 388

300
Routers & Kaleido-X
12
3. Click the Interconnects tab, then draw a line between the Kaleido-X and the newly added router
controller:
4. Click the Properties tab, then click in the field beside Connection > RS-422 Com Port . Choose an
output card from the list:
5. Under the Interconnects tab, click the router controller icon. Under the Properties tab, a list of
settings appears, with defaults for the serial communication parameters: the bit rate (bps), the
number of data bits, parity, stop bits and flow control:
However, in this case, there is no Router field for specifying which logical router is to be controlled. This
is because the SW-P-08 protocol allows the controller to pass the identifier for the logical router with