Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 352

Страница: 352 / 388

342

Third-Party Devices

Assigning Tallies, Input Names, and Output Names to Channels

To configure your Kaleido-X channels:

•

In the

Channels/Sources

tab, configure channels using text sources and system tallies from the

Kayak’s serial interface.

Notes

• Kayak devices provide up to 512 text sources, and up to 256×5 system tally sources.

• The current version of the XtenDD HD/SD switchers software does not provide tally sources.

• DD35 and the Kayak series switchers only provide RED (On Air) tally sources. This is a limitation in the

current version (6.9.3) of the ACOS protocol.

• Refer to the table below for a list of valid sources, depending on your switcher model, and their

meaning in the context of the ACOS protocol.

Input Number DD35

XtenDD HD

XtenDD SD

KayakDD

Kayak SD/HD

0x00 BLACK BLACK BLACK BLACK BLACK

0x01..0x60 Input1...62

(0x01..0x3E)

Input 1..90
(0x01..0x5A)

Input 1..32
(0x01..0x20)

Input
1..96(0x01..0x60)

0x80

VideoStore

0x81 Montage

processor

0x82 Montage

processor

0x85

DVX1 DVX1 DVX1

0x86

DVX2 DVX2 DVX2

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 352 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: