Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 222

Страница: 222 / 388

212

Creating Layouts

The Choose Background Color window appears.

4. Click the appropriate color square.

Swatches in the selected color appear under Preview.

5. Click OK to close the Choose Background Color window.

In Edit Audio Scale, the corresponding button and the corresponding part of the audio meter preview
show the selected color.

6. Repeat the procedure until all three colors are set as desired.

7. Enter the audio thresholds in Upper limit and Lower limit.

8. Type a name for the new audio scale in the box at the bottom, and then click the Save as button.

Alternatively, if you are modifying an existing custom audio scale, you can click the Save button.

Configuring an Audio Scale From a Specific Audio Meter Widget

To configure an audio scale from a specific audio meter widget:

1. In the Layouts tab, click the audio meter widget you wish to configure.

2. In the Properties pane, click the Audio scale box, under Appearance, and then click the button that

appeared at the end of the box.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 222 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: