Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 142

Страница: 142 / 388

132

Calibrating the Kaleido-X

To select the AFD source for an SD signal:

1. In XEdit, under the

System > Description/Calibrations

tab, select AFD/WSS:

2. Click to put a check mark in the box labeled

Legacy AFD 3 bits

to support the legacy AFD 3-bit format

for the Video Index.

3. Choose a value from the drop-down menu beside

SD AFD Source

The default value is

Auto

which means that the Kaleido-X will automatically detect what is present in

the signal and use it to report AFD. If more than one AFD type is present in the signal, and the

SD AFD

Source

is set to

Auto

, then AFD type is selected in this order: (1) AFD-2016 first, (2) AFD-VI, or (3) WSS.

Note:

For an HD signal, the AFD is always AFD-2016, so no calibration is needed.

4. Click

Apply to all

to apply the associated setting to all video inputs on all KXI cards.

5. On the File menu, click Save. Alternatively, click the Save button on the toolbar.

Calibrating Detail Enhancement and Dynamic Range

To configure detail enhancement and dynamic range for a video signal:

1. Click the System tab in the main window.

2. On the Configure menu, click Connect, if you wish to apply the changes in real time. If the connection

succeeds, “Connected to [IP address]” will appear in the status bar.

Note:

If this step is omitted, then you will need to export the database to apply the calibration

changes.

3. Expand the System root, and the Kaleido-X frame.

Note:

In the case of an expansion system, then you need to first expand the dual frame element, under

which both frames A and B are listed.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 142 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: