Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 157 / 388

SNMP Agents
147
4. Click the Community box (which contains “public” by default), and type a new name for the group of
target SNMP managers.
5. Click the Trap targets box.
The box displays a list of all currently-defined trap targets.
6. Click the button that appeared at the end of the box to
open the SNMP Configuration window.
The trap targets list shows all trap targets currently
identified for the selected frame.
SNMP Managers that are trap targets for this frame are
identified by their host address and port number.
7. Add, remove, or modify trap targets as needed, and
then click OK to confirm and apply the changes, or click
Cancel to close the SNMP Configuration window
without saving your changes to the trap targets list.
To add a trap target to the list:
1. In the Host address box, type the IP address of the device that has the target SNMP manager.
2. In the Port box, type the port number through which the SNMP manager will be accessed.
3. Click Add.
The new trap target is added to the list.