Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 112

Страница: 112 / 388

102

Managing Kaleido-X Systems

3. For each empty slot that should be populated with a card, right-click the slot in the System list, and

then click Insert [card type] on the shortcut menu. Alternatively drag the card from the equipment
library onto the empty card slot.

The slot name is now appended with the card type.

Card type appears to the right of the slot name

4. Repeat the previous step, until the system’s input and output slots are populated with cards that match

the hardware configuration of your Kaleido-X frame.

5. On the File menu, click Save. Alternatively, click the Save button on the toolbar.

All card assignments are saved.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 112 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: