Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 311 / 388

301
a command (i.e. it tells the Kaleido-X to make a crosspoint change for logical router X). The ID that it
passes is the logical router matrix ID (refer to “Step 3 – Adding logical routers” on page 289):
This ID must be manually entered on the Pro-Bel controller – this is usually done via a Web interface,
but is sometimes done over a serial connection. Some controllers allow you to program individual
buttons, or groups of buttons.
The Pro-Bel controller can also use the logical router level IDs (e.g. [0] Video, [1] Audio) when it sends
commands, allowing you to target just video crosspoints, just audio crosspoints, or both.
Note: You must always configure a logical router for a physical external router. There is no way to
control a physical external router directly.
Configuring Internal Router Cards
The KXO-24Router card provides 24 external monitoring outputs that can route any of the 96 HD/SD SDI
inputs of the Kaleido-X. Two cards can be installed in a Kaleido-X to provide up to 48 outputs. These
unprocessed outputs can be used to feed high-quality CRT monitors, test equipment such as waveform
monitors, as well as master control or production switchers.