Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 22 / 388

12
Getting Started
1
Step 2 – Networking Setup
For the Kaleido-X unit to join a TCP/IP network, it must be configured with an IP address, a network mask,
a gateway, and a system name. In addition, a client PC must be configured to communicate with the
Kaleido-X. You must also configure the Kaleido-RCP2 unit, and any Audio Bridge Terminal you may have
ordered with your system.
There are two possible configuration states for Kaleido-X systems as shipped:
Scenario A: If your organization had requested a specific IP configuration from Miranda, it would have been
assigned prior to shipment. A configuration document, describing the IP address assignments for the
frame and other system devices, would be included in the shipment.
Scenario B: The Kaleido-X is shipped with default settings:
Note: If you ordered multiple Kaleido-X systems at once, the second and following units have been pre-
configured with their IP addresses incremented by 10 (e.g. 10.0.3.80 for the second frame, 10.0.3.90 for a
third frame, etc.).
If, for some reason, the IP address of the Kaleido-X has been changed (i.e. it no longer corresponds to the
as-shipped configuration), it is still possible to determine the IP address.
To find the system IP address, system name and application version, do the following:
1. Connect a mouse to the front USB connector of an output card.
2. Right-click anywhere on the monitor wall. On the shortcut menu, point to Monitor Wall, and then click
Show dashboard to display the dashboard associated with the current head. A small window appears,
4RU 7RU 7RU Expansion
Frame IP address 10.0.3.70 10.0.3.70 10.0.3.70
Network mask 255.255.0.0 255.255.0.0 255.255.0.0
Gateway 10.0.0.1 10.0.0.1 10.0.0.1
Output A 10.0.3.69 10.0.3.66 10.0.3.66
Output B 10.0.3.68 10.0.3.67 10.0.3.67
Output C — 10.0.3.68 10.0.3.68
Output D/EXP — 10.0.3.69 —
Output A (frame B) — — 10.0.3.61
Output B (frame B) — — 10.0.3.62
Output C (frame B) — — 10.0.3.63