Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 109 / 388

Creating Rooms for a Cluster System
99
Once the connection is established, the selected frame becomes highlighted in the System list, and the
message “Connected to...” appears in the status bar.
7. Repeat from step 5 until all cluster members are configured.
Note: In the hierarchical list for a cluster system, an unavailable frame is indicated by a dimmed icon and
cannot be expanded. It can take up to 15 seconds before the frame status icon is updated in the System list.
Creating Rooms for a Cluster System
Create rooms for the cluster system, by adding displays associated with the different frames as
appropriate. See “Setting Up Rooms” on page 159 for details.
Notes
• Each room must have a unique name across the cluster system. XEdit will not let you use a name if there
is already a room with this name associated with one of the frames within the cluster.
• All frames associated with the cluster system must be available. If one of the member frames becomes
unavailable while you were configuring a room for the cluster system, then XEdit will not let you save
the room. If you wish to save the room anyway, first remove any unavailable frame from the cluster
system.
Creating Layouts for a Cluster System
It is possible to create a partial layout for a cluster system in offline mode, and then export it to the
appropriate frame for further online configuration. When configuring a layout for a room that is associated
with a cluster system, you only work on one part at a time: the part that is associated with the current
frame’s output heads. See “Creating Layouts” on page 183 for detailed instructions.