Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 328

Страница: 328 / 388

318

Third-Party Devices

A window appears, prompting you for a device identifier.

Device identifier input window

3. Type the name of the third-party device in the Enter device identifier box, and click OK.

4. Click the Interconnects tab.

5. Click the Kaleido-X frame icon and hold the mouse button, while dragging the pointer towards the

third-party device icon.
A line representing the connection between the frame and the device appears.

Connection between the frame and the device (example using Kalypso, same for all devices)

6. Click the connection line between the frame and the device.

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы:

Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 328 / 388

Результаты поиска

Содержание Kaleido-X (4RU)

Отзывы: