Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 31 / 388

Step 2 – Networking Setup
21
You have assigned a static IP address to the RCP2.
To select a room for the RCP2, do the following:
1. Press and hold the ENTER key on the RCP2 for 8 seconds to display the configuration menu.
2. In the ROOM SELECTION display, press ENTER again to get the room list from the Kaleido-X systems that
are currently available on the network.
3. In the room list, select the room you wish to access by pressing the 2 key (to move up in the list) or the
8 key (to move down the list).
Note: By default, the two head (DVI/VGA) outputs from each of the Output A, B, C and D cards are
assigned to ROOM 1, ROOM 2, ROOM 3 and ROOM 4 respectively.
4. When the appropriate room name is highlighted, press ENTER to accept the new selection.
5. When prompted, log on to the selected room. See “Logging on to the Kaleido-RCP2” on page 21.
Connecting the RCP2 to Other Kaleido-X Systems
The unicast IP feature enables a Kaleido-RCP2 to find up to three Kaleido-X systems on different subnets
and connect to them (via network gateways), while maintaining connections to Kaleido-X systems in its
own subnet.
Notes
• To navigate the RCP2 menu, press the 2 key to move up, or the 8 key to move down.
• There is no need to configure unicast IP addresses for Kaleido-X systems on the same subnet as the
RCP2.
To configure a unicast IP address on the RCP2, do the following:
1. Press and hold the ENTER key on the RCP2 for 8 seconds to display the configuration menu.
2. Select ETHERNET OPTIONS on the LCD display, then press ENTER.
3. Select Unicast host IP, then press ENTER.
4. Select Enable IP 1, then press ENTER.
The Enable IP x parameter instructs the RCP2 to query the selected IP address for a list of rooms.
5. Select Host IP ADDR, then press ENTER.
6. Using the numeric keypad, type the IP address of a Kaleido-X on a remote subnet, then press ENTER.
7. Repeat step 4 to 6 to add unicast IP addresses for up to three remote Kaleido-X systems.
Logging on to the Kaleido-RCP2
As a network device, the RCP2 provides access to any room configuration on any Kaleido-X system on the
network. As a security measure, access is controlled by a login procedure.