Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 340 / 388

330
Third-Party Devices
13
15. On the Kaleido-X, load the layout containing the widgets assigned to dynamic text and tallies coming
from the Sony switcher.
You should see source names and tallies from the Sony switcher on the monitor wall.
Kahuna Production Switcher
The Kaleido-X can receive dynamic source names and tally information from a Kahuna production
switcher. The procedures below describe how to set up the Kaleido-X to interface with a Kahuna switcher.
To set up the Kahuna switcher:
1. Physically connect one end of an RJ-45 crossover cable to the Kaleido-X’s RS-422 port.
2. Using an DE-9S-to-RJ-45 converter, connect the other end of the crossover cable to the appropriate RS-
422 control port on the Kahuna switcher. See “RS-422 Connection Diagram” on page 42 for pinouts on
the Kaleido-X. The illustration below shows the location of the RS-422 ports on an 11RU Kahuna
switcher. The RS-422 ports (highlighted) are numbered 1 – 8, from right to left. Refer to the
Kahuna
Install Manual for more details on the RS-422 control ports.
1
RS-422 ports (1 – 8)