Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 388

Miranda Kaleido-X (4RU) Скачать руководство пользователя страница 3

iii

Safety Compliance

This equipment complies with:

• CAN/CSA C22.2 No. 950-95 / Safety of Information Technology Equipment, Including Electrical Business

Equipment.

• UL Std. No. 1950, 3rd Ed. / Safety of Information Technology Equipment, Including Electrical Business

Equipment.

• EN 60950:1992 (2nd edition) Incorporating A1, A2, A3, A4, and A11/ Safety of Information Technology

Equipment, Including Electrical Business Equipment.

CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that contained in the operating instructions unless you are
qualified to do so. Refer all servicing to qualified service personnel. Servicing should be done in a static-
free environment.

Electromagnetic Compatibility

This equipment has been tested for verification of compliance with FCC Part 15, Subpart B, class A
requirements for Digital Devices.

This equipment complies with the requirements of:

• EN 55022 Class A, Electromagnetic Emissions,

• EN 61000-3-2 & -3-3, Disturbance in Supply Systems

• EN 61000-4-2, -3, -4, -5, -6, -8 & -11 Electromagnetic Immunity

Warranty Policies

Warranty information is available in the Support section of the Miranda web site (www.miranda.com).

«
1
2
3
4
5
...
»

Содержание Kaleido-X (4RU)





































































































































































































































































































































































































Отзывы:

Нет отзывов