MIMAKI CG-60SR, Руководство по эксплуатации

Страница: 58 / 144

3-10
Perform Multiple Cuttings
This function performs cutting (plotting) for the received data on two or more sheets.(Maximum 999
cuttings)
• You can perform multiple cuttings by specifying data saved in the receiving buffer of this device.
• The receiving buffer can save only one data.
• When a new data is received, the data that has been saved is overwritten by it.
(You cannot perform multiple cuttings by specifying the data that was received before.)
1
Press the key in the local
mode.
2
Press the jog key or to select
[No. COPIES] .
3
Press the key.
4
Press the jog key or to select
the number of cutting (1 to 999) ,and
press the
key .
5
Press the jog key or to select
the interval of figures to be cut (0 to
30mm) ,and press the
key .
Copy interval
The origin at executing the
multiple sheet cutting.
(Manual setting)
The origin at terminating
the multiple sheet cutting
(Automatically established)
D A T A C L E A R < E N T >
FUNCTION
N o . C O P I E S < E N T >
N o . C O P I E S : 1
ENTER/HOLD
N o . C O P I E S : 1 0
I N T E R V A L : 2 mm
ENTER/HOLD
I N T E R V A L : 1 0 mm
N o . C O P I E S < E N T >
ENTER/HOLD