manualshive.com logo in svg

MICRO-EPSILON C-Box/2A, Руководство по эксплуатации

Поделиться
Скачать
MICRO-EPSILON C-Box/2A Скачать руководство пользователя страница 56

Page 56

Liability for Material Defects

C-Box/2A

8. 

Liability for Material Defects

All components of the device have been checked and tested for functionality at the factory. However, if de-
fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defective parts, except for 
wearing parts, will be repaired or replaced free of charge, if the device is returned to MICRO-EPSILON with 
shipping costs prepaid. Any damage that is caused by improper handling, the use of force or by repairs or 
modifications by third parties is not covered by the liability for material defects. Repairs are carried out exclu-
sively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In particular, 
MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental damage. In the inter-
est of further development, MICRO-EPSILON reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.

9. 

Service, Repair

If the controller is defective:
If possible, save the current C-Box/2A settings in a parameter set 
on your PC

, see 6.7.4, 

to reimport them into the C-Box/2A after the 

repair. The opening of the C-Box/2A is only subjected to the manu-
facturer. In the cause of a fault cannot be clearly identified, please 
send the entire measuring system to:

MICRO-EPSILON MESSTECHNIK 

GmbH & Co. KG  

Koenigbacher Str. 15  

94496 Ortenburg / Germany 

Tel.  +49 (0) 8542 / 168-0 

Fax  +49 (0) 8542 / 168-90
[email protected]  

www.micro-epsilon.com

10. 

Decommissioning, Disposal 

  Remove all supply and output cables from the C-Box/2A.

Incorrect disposal may cause harm to the environment.

  Dispose of the device, its components and accessories, as well as the packaging materials in compli-

ance with the applicable country-specific waste treatment and disposal regulations of the region of use.

Содержание C-Box/2A

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды