manualshive.com logo in svg

MICRO-EPSILON C-Box/2A, Руководство по эксплуатации

Поделиться
Скачать
MICRO-EPSILON C-Box/2A Скачать руководство пользователя страница 54

Page 54

Setting Controller Parameters

C-Box/2A

6.7.5 

Reset

Reset

Reset to factory 
defaults

All setups

Reset C-Box/2A

The C-Box/2A is reset to the factory 
default settings. All setups will be deleted 
and the default parameters will be loaded. 

Keep interface

The settings for language, password and 
Ethernet remain unchanged.

Reboot options

Reboot sensors

Reboot C-Box/2A The C-Box/2A will be rebooted. The mea-

surement is interrupted. Unsaved changes 
are lost.

6.8 

Info

  Switch to the 

Info 

tab.

All necessary information, such as company address, telephone and fax numbers and e-mail address, as well 
as information about serial and version numbers of the controller and connected sensors is available here.

i

  The current operating instructions are available by clicking the left side of the operating instructions 

menu.

On the right side, all important controller and sensor information is available.

Fields with a gray 
background re-
quire a selection.

Value

Fields with dark 
border require the 
specification of a 
value.

Содержание C-Box/2A

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды