Metronix ARS 2320, Руководство по эксплуатации продукта

Страница: 102 / 171

Electrical installation Page 102
Product Manual „Servo drives ARS 2320, ARS 2340, ARS 2320W, ARS 2360W“ Version 8.0
Table 34: Motor temperature monitoring system and holding brake [X6A]
Pin no. Name Values Specification
1 MT+ +5 V / 5 mA Motor temperature sensor: Normally closed
contact, normally open contact, PTC
2 MT- GND
3 PE - Shield of motor temperature monitoring
system
4 PE - Shield of motor holding brake
5 BR+ 24 V brake, 2A max.
Holding brake (motor), signal level depending
on switching state, high-side / low-side switch
6 BR- 0 V brake
8.6.8 Type and configuration of cable [X6] and [X6A] at the ARS 2320 and
ARS 2320W
The cable names given refer to cables made by Lapp. They have proven to be reliable and are
successfully used in many applications. However, it is also possible to use comparable cables from
other manufacturers, for example Lütze or Helukabel.
 LAPP KABEL ÖLFLEX-SERVO 700 CY; 4 G 4 + ( 2 x 0,75 + 2 x 1,0);
∅
16.6 mm,
with tinned CU shielding
For highly flexible applications:
 LAPP KABEL ÖLFLEX-SERVO-FD 750 P; 4 G 4 + (2 x 0,75 StD) + (2 x 1,0 StD) CP;
∅
16.9 mm,
with tinned CU shielding
for highly flexible use in drag chains
8.6.9 Type and configuration of cable [X6] and [X6A] at the ARS 2340
The cable names given refer to cables made by Lapp. They have proven to be reliable and are
successfully used in many applications. However, it is also possible to use comparable cables from
other manufacturers, for example Lütze or Helukabel.
 LAPP KABEL ÖLFLEX-SERVO 700 CY; 4 G 6 + (2 x 0,75 + 2 x 1,0);
∅
17.7 mm,
with tinned CU shielding
For highly flexible applications:

LAPP KABEL ÖLFLEX-SERVO-FD 750 P; 4 G 6 + (2 x 0,75 StD) + (2 x 1,0 StD) CP;
∅
18.9 mm,
with tinned CU shielding
for highly flexible use in drag chains