If changes will be done on that nodes of external SyncMon configuration which will be monitored then a warning
sign will be displayed in the main table in the
Event
column for that node. Then you have to change parameters
manually for that node.
Event Configuration:
Offset Limit (s):
Offset threshold value in seconds. The measured offset between a node and the reference will be compared to
the configured threshold. If the calculated difference is higher than the configured offset limit the LANTIME
will generate an alarm "Sync Monitor" (which can be sent as a notification eMail, SNMP trap or to an external
syslog server). With the "Trigger" option can be choose the direction “Trigger if Limit Exceeded” or "Trigger if
Below Limit". With the option "Offset Limit [s] Trigger Counter" the Event will be triggered once after number of
limit exceeded in a row.
Stratum Limit:
Threshold value for a NTP stratum level. If the stratum level of a monitored client is higher than the configured
stratum limit, it will generate an alarm (sent by eMail, SNMP trap or to an external syslog server). With the
option “Stratum Limit Trigger Counter” the Event will be triggered once after number of limit exceeded in a row.
Not Reachable Event:
If configured Node is not reachable for monitoring then LANTIME will generate an alarm "Sync Monitor" (which
can be sent as a notification eMail, SNMP trap or to an external syslog server). With this option this can be
enabled or disabled. With the option "Not Reachable Limit Trigger Counter" the Event will be triggered once
after number of not reachable exceeded in a row.
118
Date: 2nd July 2020
LANTIME CPU Expansion Shelf
