9 LTOS7 Management and Monitoring
9.1.7.4 NTP Monlist
The submenu "NTP Monlist" lists all NTP clients which have queried the LANTIME time via NTP. The list is
created and displayed using the NTP Query Tool. The following ntpq command is issued: ntpq -c mrulist
More information about the NTP Query Tool can be found in the NTP documentation at
http://doc.ntp.org/current-stable/ntpq.html
Last:
Time in seconds. Specifies when the client requested the time from the LANTIME.
Avg Interval:
Interval: Average time in seconds between two NTP requests.
Rstr:
Shows if there are active Restrict Flags for this remote IP.
R:
Indicates whether the "Rate Control" is active or not.
M:
NTP package identification
0
→
reserved
1
→
symmetric active
2
→
symmetric passive
3
→
client
4
→
server
5
→
broadcast
6
→
NTP control message
7
→
reserved
V:
NTP Version
Count:
Number of packets received from the remote address
Rport:
"Source Port" of the last received packet
Remote Address:
IP Address of the requesting device
LANTIME CPU Expansion Shelf
Date: 2nd July 2020
107
