MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 92 / 171

88 Sheeter SVC 525C
Set-up, commissioning
Introduction
7.1.2 Safety instructions
DANGER!
Hazardous voltage.
Non-observance will result in serious injury or death.
• Only an electrically qualified person may perform work on the
machine's electrical system.
• Follow the local occupational safety regulations and electrotechnical
regulations.
• On the supply terminals and on the terminals of the main switch,
there is hazardous voltage even when the main switch is switched
off (see wiring diagram).
• There is hazardous residual voltage on the connection terminals of
the frequency inverter even when the main switch is switched off
(heed capacitor discharge time).
DANGER!
Hazardous voltage at the stationary mains connection.
Non-observance will result in serious injury or death.
• The stationary mains connection of the machine may only be made
by an electrically qualified person.
• Follow the local occupational safety regulations and electrotechnical
regulations.
• 400 V power supply. In case of a missing neutral conductor, electri-
cal components, e.g. frequency inverters, can be destroyed.
• Due to the leakage currents of the controlled drives (frequency
inverters), an equipotential bonding conductor must be connected.
See Chapter “7.3.3 Observe the design of the stationary mains
connection” and “7.3.5 Connecting additional protective equipoten-
tial bonding”
WARNING!
Use of unsuitable fork lifts.
Non-observance could result in serious injury or death.
• When selecting a fork lift, observe the relevant data such as load-
bearing capacity, load center of gravity, width of forklift carrier and
length of forks.
• For details about the minimum requirements, please see the "Tech-
nical data" chapter.
WARNING!
Tipping machine parts while unloading and installing the machine.
Non-observance could result in serious injury or death.
• Use a fork lift for transportation.
• No people may linger in the unloading area.