MBO SVC 525C Скачать руководство пользователя страница 139

Страница: 139 / 171

Sheeter SVC 525C

135

Maintenance

Introduction

WARNING!

Rotating machine parts during maintenance and cleaning work.

Non-observance could result in serious injury or death.

•

Maintenance and cleaning work must be carried out by one person
only.

•

Turn the main switch to the position <0>.

•

Use a padlock to secure the main switch from unintentionally switch-
ing on again.

•

Make absolutely sure that before the machine is switched back on,
all persons are in the secured area.

CAUTION!

Wrong/poor maintenance tool.

Non-observance could result in injury or property damage.

•

You should only use tools that are in perfect condition.

•

Make sure that after adjustment or maintenance work, there are no
tools left on or in the machine.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 139 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: