MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 165 / 171

Sheeter SVC 525C 161
Maintenance
Maintenance schedule
9.5 Maintenance schedule
Incorrect maintenance intervals during multi-shift operation.
Non-observance could result in property damage.
All specified maintenance intervals are designed for single-shift opera-
tion. For multi-shift operation, calculate the specified intervals accord-
ingly.
Chap-
ter No.:
Step Interval Date Signature
Operational
maintenance
7.6 “Inspection after initial
operation” After 20 oper-
ating hours
9.3.1 “Checking protective
devices” Daily
9.3.2 “Cleaning of the machine” Weekly
9.3.3 “Cleaning the optical sen-
sors” Daily
9.3.4 “Cleaning/replacing the fil-
ter of the vacuum pump
VT 4.25” Weekly
Maintenance
9.4.1 “Checking the pneumatic
lines” Monthly
9.4.2 “Checking the guide shaft
bearings” Monthly
9.4.3 “Changing the knives of
the longitudinal cutting
unit” In case of
wear
9.4.4 “Changing the knives of
the cutting cylinder unit” In case of
wear
9.4.5 “Changing the plastic ring” In case of
wear
9.4.6 “Changing the nylon mat” In case of
wear
9.4.7 “Checking the vacuum
pump VT 4.25” Every 3000
operating
hours
9.4.8 “Checking the fan in the
control cabinet” Monthly
Table 30: Maintenance schedule
MBO recommends attaching a copy of this maintenance schedule to the
machine.