MBO SVC 525C Скачать руководство пользователя страница 24

Страница: 24 / 171

Sheeter SVC 525C

Basic safety instructions

Warranty

2.4

Warranty

Our "General sales and delivery conditions" apply here.
Warranty and liability claims for personal injury and property damage are
excluded if they are due to one or more of the following causes:

• Non-intended use of the machine.

• Improper assembly, start-up, operation or maintenance of the machine.

• Operation of the machine with improperly-mounted or defective protec-

tive devices.

• Failure to follow the instructions in the operating manual with respect to

transport, installation, commissioning, operation, set-up, maintenance,
and storage of the machine.

• Individual constructional changes to the machine.

• Failure to adhere to maintenance and cleaning intervals that exclude a

breakdown of the machine.

• Defective monitoring of machine parts that are subject to wear, such as

belts, tapes, brushes, and couplings.

• Installation of spare and wearing parts that were not ordered from the

manufacturer.

• Cases of catastrophe and acts of God.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 24 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: