MBO SVC 525C Скачать руководство пользователя страница 89

Страница: 89 / 171

Sheeter SVC 525C

Transport, interim storage

Interim storage of the machine

6.4

Interim storage of the machine

6.4.1

Outdoors

Here's how to store the machine temporarily outdoors.

Prerequisites

These prerequisites must be fulfilled:

• Machine is bolted to the transport pallet.

• The packaging must be intact.

• Storage time outdoors = maximum two weeks.

Interim storage of

the machine

Here's how to store the machine outdoors:



Protect machine with a roof or suitable tarpaulin against humidity.



As soon as condensate forms, store the machine in a storage room
(danger of corrosion).



Loosen plastic foil from the transport pallet and lift it so that the air can
circulate.



Machine is stored temporarily.

6.4.2

In a storage room

For storage conditions, see chapter “3.2.8 Ambient conditions”

WARNING!

Incorrect storage.

Non-observance could result in severe property damage.

Observe the specified storage conditions.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 89 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: