MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 29 / 171

Sheeter SVC 525C 25
Basic safety instructions
General safety instructions
2.8 General safety instructions
2.8.1 Transport, interim storage
• Only specially-trained and authorized personnel may transport the ma-
chine.
2.8.2 Set-up, commissioning
• Only specially-trained and authorized personnel may set up and com-
mission the machine.
2.8.3 Normal operation
• Only instructed operating personnel may operate the machine.
• The machine may be operated only if all protective devices such as pro-
tective hoods and EMERGENCY STOP palm buttons, are present and
fully functional.
• The machine may only be operated with the required personal protec-
tive equipment.
• At least once per shift, the machine must also be checked for externally-
visible damage. Changes, including to the operating behavior, must be
reported immediately.
• Machine parts may not be used as climbing aids. If you need to reach
higher-up machine parts, use a suitable working stage or other platform.
Make sure that it corresponds to the safety requirements, e.g. with re-
spect to height, stability, etc.
2.8.4 Setting up/equipping
• Only specially-trained and authorized personnel may set up the ma-
chine.
• The machine may only be set up with the required personal protective
equipment.
• Inform operating personnel before beginning set-up.
• If the machine is switched off for set-up, it must be secured against un-
authorized or inadvertent switching on again.
Use a padlock to secure the main switch against switching on. If neces-
sary, attach a warning sign to the main switch.
• Machine parts may not be used as climbing aids. If higher machine
parts must be reached, a suitable working stage or other platform must
be used, which fulfills the safety-technical requirements such as height,
stability, etc.
• If larger components or parts are replaced, corresponding lift equipment
must be used to transport the components. Only use suitable and tech-
nically-perfect lift equipment and load suspension devices with suffi-
cient carrying capacity. Secure components and parts so that they
present no hazard.
Do not linger or work under suspended loads.