MBO SVC 525C Скачать руководство пользователя страница 120

Страница: 120 / 171

116

Sheeter SVC 525C

Adjustment and operation

Adjusting the machine

8.4.10

Adjusting smoothers on the conveyor table

Here's how to proceed to adjust the smoothers.

Prerequisites

These prerequisites must be fulfilled:

• The belts on the conveyor table are adjusted.

Adjusting the

smoothers

Here's how to adjust the smoothers on the conveyor table:

1) Loosen the clamping lever (1).
2) Position the smoothers (2) so that the balls/rollers run on the corre-

sponding belt.

3) Tighten the clamping lever again.
4) Make adjustments for all smoothers.



The smoothers are adjusted.

Clamping lever

Smoother

Illustration 59: Adjusting the smoothers.

•

The balls/rollers must be positioned exactly over the belts.

•

For light paper, use white plastic balls and for heavy paper steel balls.
If the steel balls are not sufficient, rollers can also be used.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 120 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: