MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 126 / 171

122 Sheeter SVC 525C
Adjustment and operation
Adjusting the machine
8.4.15 Teaching the <Print mark> sensor
Here's how to proceed to teach the <Print mark> sensor.
Prerequisites These prerequisites must be fulfilled:
• The <Print mark> sensor is set.
Teaching the sensor
Here's how to teach the sensor for the print mark:
1) Set selector switch <2> to <TEACH>.
2) Press and hold the <Teach> button (1).
3) Inch the web forwards to make a print mark under the sensor.
4) Release the <Teach> button (2).
5) Set selector switch <1> to <RUN>.

The <Print mark> sensor is taught.
Teach the print mark sensor if you are beginning a new job.
1 Selection switch 2 <Teach> button
Illustration 64: Teach <Print mark> sensor.
2
1
• For a black print mark on white paper, the selector switch (1) must
point in direction <D>.
• For a white print mark on black paper, the selector switch (1) must
point in direction <L>.
If the <Print mark> sensor is blinking after ending the teaching process,
the teaching procedure was not successful and it must be repeated.