MBO SVC 525C Скачать руководство пользователя страница 87

Страница: 87 / 171

Sheeter SVC 525C

Transport, interim storage

Packaging of the machine

6.2

Packaging of the machine

6.2.1

Machine

The machine is delivered as follows:

• On a transport pallet (Europe)

• In a shipping crate (overseas).

In addition, it is covered with plastic foil that is fastened to the transport pal-
let.

6.2.2

Accessories/options

Standard accessories, tools, options, and documentation are packaged
with the machine or accommodated in separate cartons or containers.

Procedure:



Be sure to unpack these carefully.

6.2.3

Incoming inspection

Procedure:



When you receive the shipment, check the packaging right away for
transport damage.



Check the machine and accessories for transport damage.



Check that the shipment is complete based on the delivery note.

6.2.4

In case of damage

Procedure:



Notify the transport company immediately of any damage.



Contact your transport insurance carrier immediately.



Safeguard the machine and accessories from further damage.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 87 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: