MBO SVC 525C Скачать руководство пользователя страница 101

Страница: 101 / 171

Sheeter SVC 525C

Set-up, commissioning

Connecting units to the sheeter

7.7

Connecting units to the sheeter

The sheeter control cabinet is used as the electric power supply for the fol-
lowing modules:

• Unwinder UW

• Folding machine DFT.

For each of these modules, there are power and control sockets present in
the main control cabinet.

WARNING!

Hazardous voltage when opening the control cabinet.

Non-observance could result in serious injury or death.

•

The control cabinet may only be opened by an electrically trained
person.

•

Follow the local occupational safety regulations and electrotechnical
regulations.

•

Units may only be connected by people who have received electro-
technical training, in the control cabinet of the sheeter.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 101 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: