manualshive.com logo in svg

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 141 / 171

Поделиться
Скачать
MBO SVC 525C Скачать руководство пользователя страница 141

Sheeter SVC 525C  

137

Maintenance

Operational maintenance

9.3

Operational maintenance

9.3.1

Checking protective devices

MAINTENANCE!

Rotating machine parts during operational maintenance.

Non-observance could result in serious injury or death.

Operational maintenance work:

•

May be performed by trained and authorized personnel only.

•

Must be carried out by one individual person.

•

Turn the main switch to the position <0>.

•

Use a padlock to secure the main switch from unintentionally switch-
ing on again.

•

Make absolutely sure that before the machine is switched back on, 
all persons are in the secured area.

WARNING!

Incorrectly set safety switches.

Non-observance could result in serious injury or death.

•

Make sure that the specifications for the respective gap are adhered 
to.

•

If a gap is too large, it must be re-adjusted by MBO Service or autho-
rized customer service.

•

Never dismantle, bridge or bypass safety switches.

•

All devices for shutting down the machine in an emergency and all in-
terlocking moveable guards must be checked individually and sepa-
rately from each other.

•

If any protective devices malfunction, shut down the machine imme-
diately and secure it against being switched on again.

Содержание SVC 525C












































































































































































Отзывы:

Нет отзывов