MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 147 / 171

Sheeter SVC 525C 143
Maintenance
Operational maintenance
Cleaning the ma-
chine
Here's how to clean the machine:

Suck up the dirt.

Use a brush for hard-to-reach areas.

Wipe down the surfaces using a dry cloth.

Do not use any chemically aggressive washing and cleansing agents!

The machine is clean.
9.3.3 Cleaning the optical sensors
Here's how to proceed to clean the optical sensors.
Prerequisites These prerequisites must be fulfilled:
• Main switch is switched off and secured.
• EMERGENCY STOP palm button is pressed.
Cleaning the optical
sensors
Here's how to clean the optical sensors:

Clean the optical elements of the sensors with a dry, lint-free cloth.

Optical sensors are clean.
• Clean the machine at least once per week.
• The dust layer must never exceed 1 mm (0.039 in.).
• Never clean the machine using compressed air. (bearing damage)
• Heavy contamination can impair the functioning of the machine.
The optical elements of the print mark sensor are blown out with com-
pressed air during operation.
• The optical sensors of the machine get dirty during production due to
paper dust and printing powder.
• They should therefore be cleaned after each job (daily).