MBO SVC 525C Скачать руководство пользователя страница 60

Страница: 60 / 171

Sheeter SVC 525C

Structure and function

Protective devices

4.5.3

Protective hood with guard locking

How to open the protective hood:



Lift and hold the protective hood.

The machine stops.



After detection of the secure stop, the guard locking is unlocked.

The protective hood can now be opened completely.



The protective hood is open.

4.5.4

Guard door with guard locking

Protective hood with guard locking

Illustration 20: Protective hood with guard locking

•

The protective hood prevents intervention in the in-feed area and in
the cross-cutting area of the machine.

•

It is fitted with a guard locking.
This means that the protective hood can only be opened after the se-
cure stopping of the machine.

Guard door with guard locking

Illustration 21: Guard door with guard locking

•

The

guard door

prevents intervention in the drive area of the machine.

•

The

guard door

is fitted with guard locking.

In other words, the

guard door

can only be opened when the protective

hood is open.

Содержание SVC 525C












































































































































































Результаты поиска

Содержание SVC 525C

Отзывы:

MBO SVC 525C, Перевод оригинального руководства по эксплуатации, Страница: 60 / 171

Результаты поиска

Содержание SVC 525C

Отзывы: