LPKF ProtoMat C 30-S, Руководство пользователя

Страница: 59 / 72

Appendix
ProtoMat C30/C30-S 59
13.10 The Command set
13.10.1 Command structure
The SMCU ( S ignal P rocessor C ontrol U nit) control unit in the machine
interprets the HP-GL commands described below and converts them
into defined actions.
The machine has a resolution of 7.9375 µm .
This differs from the resolution used by standard HP-GL plotters. The
use of master commands reduces the output.
The syntax:
The SMCUexpects a separator, which may not be a digit or uppercase
letter, between the command parameters. A new command can follow a
parameter without a separator. The last character transmitted in a
command file must be a semicolon or a line feed character (0A hex.).
Unrecognized commands are ignored by the control unit, but their
parameters can lead to unwanted plot absolute or plot relative
commands.
Symbol Meaning
{...} The contents can be repeated any number of times.
() The command parameters are contained within these brackets.
[] The content of these brackets is optional and does not have to be
included.