Appendix
52 ProtoMat C30/C30-S
13.2.1 Carriage guide wipers of the Y-axis
› Drive the cutting head in the Homeposition, before the Y-axis will be
lubricated.
› Before the lubrication the Y-axis you must loose the cover located
internal hexagon head screws (3mm).
› After remoting the screws take off the cover.
The positions of the oil insertion opening for the carriage guide wipers of
the Y-axis are marked in the following image with arrows:
fig. 34:
For the lubrication you have to use an acid-free precision mechanic - oil!
Stick the dosing neadle (conical grey) on the on-time syringe (delivered
with the mashine).
In the following image you can see the construction.
Now you have to lubricate all four carriage guide wipers of the Y-axis
with the help of the one-time syringe (See following image). The
prescribed quantity of oil for one carriage guide wiper totals 0,5 ml.
fig. 35:
Содержание ProtoMat C 30-S
Страница 72: ...Index 72 ProtoMat C30 C30 S...
