background image

ProtoMat C30/C30-S

                                                                                                                                                                            3

Information on this manuel

The information contained in this document may be modified without 

prior notification. No part of this document may be reproduced or 

transmitted for any purpose or in any form by any means, electronic or 

mechanical, by photocopy, by recording or by information storage and 

information retrieval systems without the express written permission of 

LPKF.

We have taken great trouble to ensure the accuracy and completeness 

of the information in this document. However, LPKF accepts no liability 

for the use of the document, including breach of copyright or other 

infringement against third parties which may arise from this.

It is the duty of the system owner to care for and plan these measures as 

well as to control their execution. The owner especially has to ensure 

that

• the system is only used as directed

• the system is only operated in perfect and functional 

condition. Especially the function of the safty appliances 

has to be checked regularly

• the necessary personal protectiv equipment for the 

operating, maintaining and repairing personnel is available 

and being used

• the operating manual is kept legible and complete at the 

place of operation

• only sufficiently qualified and authorized personnel 

operates, maintains and repairs the system

• this personnel is regularly instructed in matters of work 

safety and environmental protection and is informed on the 

operation manuel and especially the safety instructions

• all safety and warning notes or signs stay on the system and 

are legible

Содержание ProtoMat C 30-S









































































Отзывы: