LPKF ProtoMat C 30-S Скачать руководство пользователя страница 39

Страница: 39 / 72

Procedures for milling and drilling

ProtoMat C30/C30-S

10.3 Changing a tool (C30)

› Remove the tool fixing screw (see picture working depth limiter)

› Pull out a possibly available tool with the help of a tweezers from the

tool housing.

› Introduce the new tool up to the plot in the tool housing with a

tweezers.

› Move and fix the fixing screw.

10.4 Changing a tool (C30/S)

The plotter spindle collet on the

ProtoMat C30 (C30/S)

is operated by a

lever which simultaneously disengages the DC motor via a clutch as a

spring packet opens the collet.

Caution! There must be a tool in the plotter spindle collet whenever

the machine is switched on. It is imperative that the collet is closed.

(The collet is closed when the lever is in the “up” position).

Operating the lever when the motor is running could damage the

coupling between the motor and the collet. Do not switch on the

motor by opened tool clamp or without tool!

fig. 22: Operating the plotter spindle

collet

Position

: Lever in the normal position. The collet is closed.

The motor is connected to the spindle by a clutch.

Position

: The lever must be pushed down to open the collet.

The clutch disengages the motor and a spring pack opens

the collet.

Position

: After the lever is pushed down, the open collet is locked

open by moving the lever to the right. It is now a simple

matter to change the tool using the tweezers supplied.

Содержание ProtoMat C 30-S









































































Результаты поиска

Содержание ProtoMat C 30-S

Отзывы:

Похожие инструкции для ProtoMat C 30-S

Бренды по названию

Популярные бренды

LPKF ProtoMat C 30-S, Руководство пользователя

Результаты поиска

Содержание ProtoMat C 30-S

Отзывы:

Похожие инструкции для ProtoMat C 30-S

Бренды по названию

Популярные бренды