LPKF ProtoMat C 30-S, Руководство пользователя

Страница: 32 / 72

Tutorial on creating a printed circuit board
32 ProtoMat C30/C30-S
› Select the MILLINGTOP milling phase and machine as described
above. If required, select the CUTTING milling phase and machine
with a contour milling cutter.
› Move to the Pause position, remove the board and proceed as
described in the section entitled "Cleaning the board".
8.1 Reprogramming the machine data
You will have to re-enter the Pause or Home position data in the
machine settings if the PC operating system crashes and the head no
longer moves to these positions. Proceed as follows:
› Start up BoardMaster .
› Select CONFIGURATION, PARAMETERS from the menu bar.
fig. 17:
fig. 18:
› Click UNLOCK.
This activates the CONTROL, SET HOME and INITIALIZE boxes.
› Click on INITIALIZE .
The device moves to all four end positions. The device then comes to
a halt in the zero position (at the front right). The traverse range thus
determined is displayed under SIZE and saved by BoardMaster.
See the BoardMaster Manual for more detailed information.The
coordinates for the Home position are generated automatically.
The X value is set at
0
and the Y value corresponds to half the value
specified for Y under
Size
.