Tutorial on creating a printed circuit board
ProtoMat C30/C30-S
31
BoardMaster requests the tool required for the machining phase and
the machine moves to the
TOOL CHANGE
position and automatically
switches the motor off.
› Push down the lever to open the collet and lock it in position by
moving it to the right.
The tool in the machine can now be removed from the collet using the
tweezers supplied.
› Insert the tool requested as far as it will go and unlock the lever by
moving it to the left and then up.
The collet is now closed.
› Confirm the tool change by clicking
OK
.
The motor switches on and the first drilling diameter of the drilling
phase is executed. Once the holes of the current diameter have been
made, the next tool is requested and changed in the same way.
› Once the drilling phase has finished, the
MILLINGBOTTOM
milling
phase is selected once any galvanic through-hole plating has been
carried out.
› Click on
to select the milling data.
The selected data is shown lighter.
› Click on the button
START
.
The plotter head moves to the
TOOL CHANGE
position and prompts
for the current tool.
› Click
STOP FOR ALTERATION AFTER TOOL CHANGE
in the
TOOL
combo box to set the milling depth.
› Insert the universal milling cutter.
› Click
OK
to quit the dialog box.
› Use the arrow buttons in
BoardMaster
to move to a free position on
the base material.
› Set the step size to 5-10 mm in the
STEP SIZE
box.
› Click the
AUTO-MOTOR-ON
button,
› Switch on the motor using the
MOTOR ON/OFF
button,
› Lower the head by clicking
and move the head using the arrow
buttons. Set the milling depth. See also the section entitled "How the
mechanical working depth limiter works".
› Switch off the motor by clicking on
MOTOR ON/OFF
and
switch
the motor back on by clicking on the
AUTO-MOTOR-ON
button.
› To start the machining use the
START
button.
› Then move to the Pause position and turn the material if you are
machining a double-sided base.
Содержание ProtoMat C 30-S
Страница 72: ...Index 72 ProtoMat C30 C30 S...
