LPKF ProtoMat C 30-S, Руководство пользователя

Страница: 61 / 72

Appendix
ProtoMat C30/C30-S 61
PA (x1,y1{,...xn,yn}){;}
Plot Absolute
Draws a line from the current position to the absolute coordinates
specified in sequence. The PU and PD commands can be
specified as parameters between the coordinate pairs. The PA
command word is not necessary if additional coordinate pairs are
sent. All coordinate pairs without a command word are taken to
relate to the last PA or PR commands sent and are executed
accordingly.
PD {;}
Pen Down
Lowers the tool.
PR (x1,y1{,...xn,yn}){;}
Plot Relative
Draws a line from the current position to the relative coordinates
specified in sequence. The PU and PD commands can be
specified as parameters between the coordinate pairs. The PA
command word is not necessary if additional coordinate pairs are
sent. All coordinate pairs without a command word are taken to
relate to the last PA or PR commands sent and are executed
accordingly.
PU {;}
Pen Up
Raises the tool.
VS (v{,n}){;}
Velocity Select
Defines the track speed v=[µm/s] in the XY-plane with the tool
lowered and assigns this speed to the tool with number n.
13.10.3 Special commands
All special commands begin with the "!" character and their syntax is
otherwise the same as that for HP-GL standard commands.
!AS (a){;}
Acceleration Set
Dines a new acceleration constant a=mm/s2. The permissible
value range is 10 to 50000.
!CC {;}
Close Channel
Terminates any data transfer introduced with the command !OC.
!CM (n){;}
Change Mode
Toggles between the drill (n=0) and the mill working modes (n=1).
!CT (n){;}
Command Counter
Toggles between the echo mode (n=1) and the non-echo mode
(n=0). In echo mode, the machine confirms every correctly
completed command with the message "C<cr>".
!EM (n){;}
External Motor
Switches the milling/drilling motor on (n=1) or off (n=0)