LPKF ProtoMat C 30-S, Руководство пользователя

Страница: 26 / 72

Functional test with LPKF BoardMaster
26 ProtoMat C30/C30-S
7.3 Programing the HOME position in
LPKF BoardMaster
As previously explained, the Home position of the LPKF ProtoMat C30
(C30/S) must lie precisely on the machine's axis of symmetry (the
registration hole system with the red plastic slides) when you are
machining double-sided base. You must enter a correction if a check as
described above shows that the Home position does not lie on the axis
of symmetry.
Proceed as follows to do this:
› Start up BoardMaster .
› Select CONFIGURATION, SETTINGS from the menu bar.
fig. 13:
› Click on UNLOCK so that you can make entries in this dialog box.
fig. 14:
› If necessary, correct the Home position coordinates by increased or
decreasing the value by the value previously measured.
› The new values will only be saved when the MACHINE SETTINGS...
dialog box is closed and you quit BoardMaster .