Tools, material and accessories
34 ProtoMat C30/C30-S
9.0 Tools, material and accessories
9.1 Tools
The tools for the
LPKF
ProtoMat C30 (C30/S)
come in two different
lengths.
Tools used to machine the material surface (milling and engraving) are
36 mm long while tools used for drilling or contour milling are 38 mm
long. The following tools are available:
fig. 19: LPKF tools for circuit-board
plotter
Caution! Only change tools in the positions defined for this
purpose.
The tools must always be inserted in the toolholder as far as the stop,
otherwise the working depth will be incorrect.
In certain circumstances, this can even result in damage to the machine
base plate.
Tweezers are supplied for tool insertion and removal.
1
- universal LPKF milling
cutter and drill
for milling isolation channels and for engraving front panels
from 0.2 - 0.5 mm (depending on depth set). 36 mm long
2
- LPKF microm illing cutter
for milling 0.1 to 0.2 mm isolation channels (depending on
depth set) with a 17 µm copper cladding on the base
material. 36 mm long
3
- LPKF HF milling cutter
for creating 0.25 mm or 0.4 mm wide
rectangular section isolation channels.
4-
double-chamfered cutter
(0.8 mm; 1 mm; 2 mm)
for engraving front panels and for engraving wider isolation
channels. 36 mm long
5
- twist drill
of various diameters for drilling in base material. 38 mm long
6
- contour milling cutter
(1.0 mm; 2.0 mm)
for milling out cut-outs in the base material. 38 mm long
Содержание ProtoMat C 30-S
Страница 72: ...Index 72 ProtoMat C30 C30 S...
