Lowenstein Medical elisa 300, Инструкция по эксплуатации

Страница: 164 / 457

9 | Alarms and troubleshooting
162
Basic Instructions for Use elisa 300-500
|
SW 2.09.x
|
Rev. 11
Code Error message Corrective measure
#654
O
2
supply
Low oxygen inlet pressure
Correct or acknowledge error,
contact authorised service agent
#801
to
#805
Various alarm LED errors
(ventilator unit)
Do not use ventilator, switch OFF,
contact authorised service agent
#811
and
#812
Various buzzer errors
(ventilator unit)
Do not use ventilator, switch OFF,
contact authorised service agent
#813
and
#814
Various power supply errors
in the main controller
Do not use ventilator, switch OFF,
contact authorised service agent
#815
and
#816
Various power supply errors
in the sensor controller
Do not use ventilator, switch OFF,
contact authorised service agent
#817
to
#826
Various power supply errors
in the main board
Do not use ventilator, switch OFF,
contact authorised service agent
#827
Buffer battery
RTC drained
Set date and time
Ventilator may be used
contact authorised service agent
#831
and
#833
Measurement of ventilator
unit temperature < 5°C
Allow device to warm up
#832
and
#834
Check ambient temperature
Rule out presence of external heat sources caus -
ing rise in temperature
#835
to
#837
Various errors due to
defective heating of expiratory
flow sensor
Do not use ventilator, switch OFF,
contact authorised service agent
#841
to
#847
Various “internal memory”
errors
Acknowledge error,
Check all ventilator settings and alarm limits,
adapt if required
contact authorised service agent
#851
to
#855
Internal Safety Circuit Error
Do not use ventilator, switch OFF,
contact authorised service agent
#861
to
#867
Various battery errors
Battery compartment 1
Replace battery or insert additional
battery in compartment 2
#868
Remaining usage time on
battery 1
< 5 min
Connect device to the mains
#869
Capacity of battery 1
is insufficient for number
of accessory devices
Connect device to the mains