Lowenstein Medical elisa 300 Скачать руководство пользователя страница 434

Страница: 434 / 457

Instructions for Use Supplement E – External Communication, Rev. 02

2.4

Interface specification

2.4.1

Configuration of the external receiving interface

The receiving system must have a serial interface that corresponds to the speci-

fied communication interface of the elisa (or elisa@megs).

You may have to use an adapter for the 9-pin SUB-D socket (female) to connect

the elisa (or elisa@megs) to the receiving system (hospital monitor or hospital

information system).

For the serial interfaces for external communication, the Salvia protocol is stand-

ard. At the configuration level of elisa 600 – 800 VIT, the Philips protocol can

optionally be preset.

2.4.2

EC Interface SALVIA

For a detailed specification of the SALVIA protocol, please refer to this document:

Salvia_Serial_Protocol_1_0_1_3.pdf

2.4.3

EC Interface Philips

For a detailed specification of the Philips protocol, please refer to this document:

Salvia_Philips Protokoll.pdf

2.4.4

elisa@megs

The medical equipment interface elisa@megs has one input interface and five

output interfaces.

Four of these interfaces use the Salvia protocol, one interface uses the Philips

protocol.

Содержание elisa 300










































































































































































































































































































































































































































































Результаты поиска

Содержание elisa 300

Отзывы:

Lowenstein Medical elisa 300, Инструкция по эксплуатации, Страница: 434 / 457

Результаты поиска

Содержание elisa 300

Отзывы: