Lowenstein Medical elisa 300 Скачать руководство пользователя страница 361

Страница: 361 / 457

Instructions for Use Supplement B – CO

Sensor LeoCap

Rev. 04

The device fulfils the requirements of Directive 93/42/EEC concerning

medical devices

and of Regulation (EU) 2017/745

, provided it is operated

according to the instructions for use.

0123 is the notified body.

Follow the instructions for use!

Prohibition sign

IP44

Protection class according to DIN EN 60529

The sensor must be disposed of in compliance with Directive 2002/96/

EC.

Sensor operation

4.1

Installation

To ensure the best possible sensor performance, it needs to be correctly installed

and connected. The sensor is to be treated like an electronic device and must be

properly secured with the available accessories.

Communication to and from the device is via a serial connection (BF interface of

the intensive care ventilator).

4.2

Connecting the sensor

• Connect the LeoCap CO

sensor to the configured BF interface on the back

of the ventilator using the connection cable. You can review the current inter-

face configuration on the standby or ventilation screen under the “Status” tab

by selecting the second view with a horizontal swipe. If in doubt, contact your

service technician.

Содержание elisa 300










































































































































































































































































































































































































































































Результаты поиска

Содержание elisa 300

Отзывы:

Lowenstein Medical elisa 300, Инструкция по эксплуатации, Страница: 361 / 457

Результаты поиска

Содержание elisa 300

Отзывы: