10
SETTING THE DATE AND TIME
It is highly recommended to immediately set the date and time when first setting up your system.
To set the date and time:
1. Right-click anywhere on the screen to open the
Sub-Menu and select
MAIN MENU
. The Main Menu
opens.
2. From the Main Menu, click
BASIC
. The Setup menu
opens.
3. Click
DATE/TIME
and configure the following options:
•
DATE
: Enter the day, month, and year
•
DATE FORMAT
: Select
DD/MM/YYYY
,
MM/DD/YYYY
,
or
YYYY/MM/DD
•
TIME
: Enter the time
•
TIME FORMAT
: Use the drop-down menu and select
12HOURS
or
24HOURS
•
DST
: Use the drop-down menu to select ON/OFF to
enable/disable Daylight Savings Time
4. Click
MODIFY DATE AND TIME
. Click
CLOSE
in the
confirmation window.
5. Click
APPLY
. The new date and time are saved.
Daylight Savings Time
To set daylight savings time:
1. Under DST, select
ON
. DST options appear.
2. Under DST MODE select one of the following:
•
CUSTOM
: Set customized start and end times for DST
(go to step 4)
•
DEFAULT
: The Default setting will apply DST from the
second Sunday of March to the second Sunday in
November (go to step 3)
3. If using the DEFAULT, click
APPLY
.
4. If setting a CUSTOM DST, use the drop-down menus to
select a week and month for the start and end times.
5. Click
APPLY
. Click
CLOSE
in the confirmation window.
6. Click
EXIT
in each menu until all windows are closed.
Figure 5.0 Click DATE/TIME from the Setup Menu
Figure 5.1 Configure date & time options
Figure 5.2 Configure DST settings